How To KAP For Under $20


I began this project with young people in mind. Most of the KAP done today is beyond the means of most youth. Kites that are $100US or more, cameras that are $100 or more, and Radio Control equipment that usually exceeds $100, all make for a substantial outlay for most youth. This article should prove to be useful to educators as a class project, as a subject for a workshop, or even a science fair project.

One of the great joys of my youth was the time I spent flying kites and wondering what it would be like to be up in the sky with my kite. Back then it was well within the means of most kids to buy a kite or at least talk their parents into buying a kite for them. Today the $20US limit I have set to develop a complete KAP system is very easily within the range of most youth using either the power of their purse or the power of their persuasion.

Setting Limits

For $20US I have to build/buy a kite, line, camera, and a means to snap the picture. I also want to use materials that are easily found in most homes or obtained from local sources without having to special order.

Collecting Supplies

So far I’ve only assembled some materials to use in this project. The biggest limitation is the size of kite that can be bought or made to lift a projected .5 pounds (227 grams). For a inexpensive camera I chose a disposable outdoor camera (no flash) made by Fujifilm. It is loaded with 27 exposures of 800 DX film and weighs 2.2 ounces (63 grams).
The equivalent Kodak disposable outdoor camera should work just as well. The weight should be close to the same and the price is usually the same. The only difference I am aware of is a very slight difference in the location for the shutter button

Purchased So Far

  1. Disposable Outdoor Camera-$4.96
  2. 500 foot of braided nylon-$4.00
  3. 6 – 5/16” X 36”wooden dowels @ $.52 ea-$3.12
  4. One 33 gallon trash bag (sail material) -$0.10
  5. Bag of assorted rubber bands- $0.41
  6. TOTAL-$12.59
  8. 2-5/16” X 48” wooden dowels @ $.53 ea.-$1.06

That leaves $7.41 to trip the shutter. Looks like this is going to work!

Tripping The Shutter 
Dec. 27, 1999

Idea #1

I bought a bag of assorted rubber bands at the discount store. These will be used to experiment with a shutter activation system. In my mind some sort of lever under rubber band tension will depress the shutter button. This lever will be restrained by another rubber band which will be wound up like a rubber band powered airplane. I am currently stumped about how to slow the unwinding of the rubber band, there may not be a simple solution.

Idea #2

Another solution to restrain the shutter button lever just popped into my head. Use a small rubber balloon, wedged between the camera and the lever, to hold the lever back. Place a plug in the open end of the balloon that will have a very small hole to release the air very slowly. As the balloon looses air it will eventually allow the lever to depress the shutter button. I think this idea has more promise. The only problem this will create is getting the balloon away from my 2 year old.

Read also :

Kite 101 : Flying Characteristics

Behaviors noticeable after attachment of cradle to kite line.

Frequently individuals who are interested in KAP (Kite Aerial Photography), but have never flown a rig, have false expectations about the stability of a flying KAP rig. A KAP rig is almost constantly in motion because of small changes in wind speed and wind direction. The periods where the KAP rig appears fixed to one point in the sky only last for a few seconds.

#1. Yo-Yo Effect

The wind constantly changes speed. The amount of pull on the kite line will also be constantly changing, producing the yo-yo effect. The KAP rig will gain and loose altitude with every small change in wind speed. The magnitude of this effect varies with different style kites, and some locations may have steadier winds than others.

#2. Lateral Swing

A picavet and a properly designed pendulum will keep the rig level as the angle of the line changes, however neither will prevent lateral swinging caused by the kite constantly changing horizontal direction.
(see l’arc stabilisateur below for a solution)
Most KAPers wait to trip the shutter when the swinging motion has subsided and the rig is level to prevent motion blur and to achieve a nice level composition. In high winds this problem is more persistent.

Read also : Measuring Wind Speed

#3. l’arc stabilisateur by Christian Becot

Christian Becot published this solution to lateral swing in the aerial eye (4:2). Two small sails are placed on a bowed horizontal spar. This creates a dihedral between the two sails which helps dampen the lateral swinging motions. Notice that the crosspiece is mounted high on the pendulum near the kite line, this keeps the stabilizer from pushing the pendulum back from vertical. Brooks Leffler used a variation on a picavet mounted stereo rig (the aerial eye 4:1)

#4. Camera Distance From The Anchor Point

This is an overhead view of a person flying a kite with two cameras attached at different locations on the line, the camera furthest from the person moves a much greater distance in the same amount of time than the camera closer to the person. The furthest camera is therefore moving faster than the closer camera.

Read also : Background ppt hd

This faster speed will cause greater lateral swinging. The combination of increased swing and greater lateral speed could cause blurred photographs. In turbulent winds moving the camera closer would lessen the chance of blurred pictures.

I think that’s all. Any question? 🙂