I began this project with young people in mind. Most of the KAP done today is beyond the means of most youth. Kites that are $100US or more, cameras that are $100 or more, and Radio Control equipment that usually exceeds $100, all make for a substantial outlay for most youth. This article should prove to be useful to educators as a class project, as a subject for a workshop, or even a science fair project.
One of the great joys of my youth was the time I spent flying kites and wondering what it would be like to be up in the sky with my kite. Back then it was well within the means of most kids to buy a kite or at least talk their parents into buying a kite for them. Today the $20US limit I have set to develop a complete KAP system is very easily within the range of most youth using either the power of their purse or the power of their persuasion.
For $20US I have to build/buy a kite, line, camera, and a means to snap the picture. I also want to use materials that are easily found in most homes or obtained from local sources without having to special order.
So far I’ve only assembled some materials to use in this project. The biggest limitation is the size of kite that can be bought or made to lift a projected .5 pounds (227 grams). For a inexpensive camera I chose a disposable outdoor camera (no flash) made by Fujifilm. It is loaded with 27 exposures of 800 DX film and weighs 2.2 ounces (63 grams).
The equivalent Kodak disposable outdoor camera should work just as well. The weight should be close to the same and the price is usually the same. The only difference I am aware of is a very slight difference in the location for the shutter button
Purchased So Far
- Disposable Outdoor Camera-$4.96
- 500 foot of braided nylon-$4.00
- 6 – 5/16” X 36”wooden dowels @ $.52 ea-$3.12
- One 33 gallon trash bag (sail material) -$0.10
- Bag of assorted rubber bands- $0.41
- OPTIONAL ITEMS
- 2-5/16” X 48” wooden dowels @ $.53 ea.-$1.06
That leaves $7.41 to trip the shutter. Looks like this is going to work!
Tripping The Shutter
Dec. 27, 1999
I bought a bag of assorted rubber bands at the discount store. These will be used to experiment with a shutter activation system. In my mind some sort of lever under rubber band tension will depress the shutter button. This lever will be restrained by another rubber band which will be wound up like a rubber band powered airplane. I am currently stumped about how to slow the unwinding of the rubber band, there may not be a simple solution.
Another solution to restrain the shutter button lever just popped into my head. Use a small rubber balloon, wedged between the camera and the lever, to hold the lever back. Place a plug in the open end of the balloon that will have a very small hole to release the air very slowly. As the balloon looses air it will eventually allow the lever to depress the shutter button. I think this idea has more promise. The only problem this will create is getting the balloon away from my 2 year old.
Read also :